Feb. 2008 FOTM with Pictures "Charlie's Nymph"
The pictures in my submittal didn't come out, so here it is again with pictures. Hope the tying steps and photos are useful for you. Tight lines!
Trout Predator Online
Fly-Of-The-Month for February 2008
Charlies Nymph
http://i164.photobucket.com/albums/u...m/image001.jpg
This months selection is from the great book entitled Guide to Maryland Trout Fishing: The Catch-and-Release Streams, by Charlie Gelso and Larry Coburn. The last chapter of this book recommends patterns for fishing their home waters, but one fly in particular seems well-suited to any stream, as it represents the Black Winter Stonefly. You will see this insect walking on the snow in late February through March, particularly on the Farmington River. When the sun is bright, this hatch can be quite heavy, and given the relative paucity of other food items for trout during this time, the trout take notice.
For this recipe and tying instructions, I took a few liberties to update the pattern a bit, utilizing some modern materials such as UV Black Ice Dub. Add this fly to your nymph rig during March and you cant go wrong.
Materials:
1. TMC 3761, size 16-20 (here in a 16 for clarity)
http://i164.photobucket.com/albums/u...m/image003.jpg
2. Black 8/0 Uni-Thread
http://i164.photobucket.com/albums/u...m/image005.jpg
3. Fine Gold Wire
http://i164.photobucket.com/albums/u...m/image007.jpg
4. Black Krystal Flash
http://i164.photobucket.com/albums/u...m/image009.jpg
5. Brown Swiss Straw
http://i164.photobucket.com/albums/u...m/image011.jpg
6. Black Hard Head Fly Finish or Black Nail Polish
http://i164.photobucket.com/albums/u...m/image013.jpg
7. Hareline Dubbin Stonefly
http://i164.photobucket.com/albums/u...m/image015.jpg
8. Ice Dub UV Black
http://i164.photobucket.com/albums/u...m/image017.jpg
Tying Steps:
(1) Blend a mixture of Hareline Dubbin Stonefly with Ice Dub UV Black in your coffee bean grinder
http://i164.photobucket.com/albums/u...m/image019.jpg
(2) Start the tying thread mid-way and dub a small ball where the bend begins
http://i164.photobucket.com/albums/u...m/image021.jpg
(3) Advance the thread back to the mid-point and tie in one strand of Krystal flash to make a split tail
http://i164.photobucket.com/albums/u...m/image023.jpg
(4) Cut the tails to be half the hook length and tie in a fine gold wire
http://i164.photobucket.com/albums/u...m/image025.jpg
(5) Split a small section of Swiss straw in half length-wise to reduce wing case bulk. Tie in the wing case just ahead of the half-way point
http://i164.photobucket.com/albums/u...m/image027.jpg
(6) Take one turn of thread behind the Swiss straw to stand it up and move thread back to rear of fly. Dub a moderately stout section of thread
http://i164.photobucket.com/albums/u...m/image029.jpg
(7) Advance the dubbing carefully to build a tapered body, clearly thicker in the thorax. Remember that the thorax tends to compress when the wing case is pulled over.
http://i164.photobucket.com/albums/u...m/image031.jpg
( 8 ) For expediency, I rib my nymphs in this manner, taking close-spaced turns in the rear half of the fly, then making one wide turn through the thorax. Tie off the rib at the eye
http://i164.photobucket.com/albums/u...m/image033.jpg
(9) Fold the wing case over in a slight hump and tie off
http://i164.photobucket.com/albums/u...m/image035.jpg
(10) Cut the wing case off, whip finish and Velcro brush out some legs
http://i164.photobucket.com/albums/u...m/image037.jpg
(11) With the fly still in the vise, add a small droplet of hard head over the Swiss straw to darken and strengthen it, while adding a slight shine.
(12) Take your fly outside and drop it in the snow. You will see it is a close comparison to the actual insects.
http://i164.photobucket.com/albums/u...m/image001.jpg
Re: Feb. 2008 FOTM with Pictures "Charlie's Nymph"
Wow, tying instruction doesn't get much clearer than this! Nice job Alain.
Re: Feb. 2008 FOTM with Pictures "Charlie's Nymph"
I really like the krystal flash tails. That gives me some ideas for other patterns that I tie.
Re: Feb. 2008 FOTM with Pictures "Charlie's Nymph"
I've done some Steelhead nymphs with Krystal flash tails before, they work! Maybe a high water golden stonefly pattern for trout with brown or copper Krystal flash tails?
Re: Feb. 2008 FOTM with Pictures "Charlie's Nymph"
Wonder how Charlie's Nymph would work tied in all brown on a #14-16 1xl nymph hook, to imitate the Early Brown Stoneflies in March/April? The wheels are turnin' now...
Re: Feb. 2008 FOTM with Pictures "Charlie's Nymph"
You're right! Those brown stoneflies hatch in profusion on the Housatonic, at the same time as the Hendricksons. It might even be a masking hatch, I'm not 100% sure. One time I was fishing around Carse Pool and there was a huge flight of the brown stones.
Re: Feb. 2008 FOTM with Pictures "Charlie's Nymph"
I kind of like to fish patterns that could pass as either, that way you have both bases covered. But that pattern in brown in a #14 would cover pretty much both hatches I think.
Re: Feb. 2008 FOTM with Pictures "Charlie's Nymph"
AlanB,
Thanks for the photos and posting, great instructions.
I really like the simple design.
Regards,
FK
Re: Feb. 2008 FOTM with Pictures "Charlie's Nymph"
Thanks for the recipe. I learned alot from you guys, with making simple but deadly patterns. Thanks again.
Re: Feb. 2008 FOTM with Pictures "Charlie's Nymph"
Simple & Deadly, that's the way we like 'em. Not to be confused with Silent but Deadly. ;)
Re: Feb. 2008 FOTM with Pictures "Charlie's Nymph"
Here is a link to a couple of pics of the nymph.
http://www.troutnut.com/specimen/350
Re: Feb. 2008 FOTM with Pictures "Charlie's Nymph"
Tied in a #16-18 or even a #20, Charlie's Nymph would imitate the small black Capnia Stonefly. In a #12-14, it would imitate the Early Black Stone. This is all assuming a 1xl nymph hook. If you used a 3xl, it would be necessary to drop down a size.
